I took the SE in for a wheel alignment from Jax at Blacktown today. They did a pretty good job. They matched what I asked for fairly closely and even had someone in the driver seat while it was being done.
The old alignment had been shocking. The measurements from before were way off with huge differences left to right. eg. 3.7mm toe in LH rear vs. 1.9mm toe out RH rear.
Specs requested were: -1 deg camber front and rear; 2mm toe in total front and rear; 4 to 6 deg caster. They got it almost spot on with only the LH rear not quite there at only -0.6 deg camber.
Needless to say the car feels much better now. 🙂